# | Title | Journal | Year | Citations |
---|
1 | Structural and Electronic Properties of ZnWO4(010) Cleaved Surface | Crystal Growth and Design | 2011 | 153 |
2 | Large Tunneling Magnetoresistance in van der Waals Ferromagnet/Semiconductor Heterojunctions | Advanced Materials | 2021 | 61 |
3 | A new type of (TiZrNbTaHf)N/MoN nanocomposite coating: Microstructure and properties depending on energy of incident ions | Composites Part B: Engineering | 2018 | 60 |
4 | X-ray diffraction study of amorphous alloys Al–Ni–Ce–Sc with using Ehrenfest’s formula | Journal of Non-Crystalline Solids | 2006 | 52 |
5 | The influence of Zr alloying on the structure and properties of Al 3 Ti | Intermetallics | 2003 | 49 |
6 | Thermal Stability of Superhard Nitride Coatings from High-Entropy Multicomponent Ti–V–Zr–Nb–Hf Alloy | Powder Metallurgy and Metal Ceramics | 2014 | 49 |
7 | XPS studies of the surface of nanocrystalline tungsten disulfide | Journal of Electron Spectroscopy and Related Phenomena | 2010 | 48 |
8 | The effects of Cr and Si additions and deposition conditions on the structure and properties of the (Zr-Ti-Nb)N coatings | Ceramics International | 2017 | 46 |
9 | B12 molecule in LuB12">Rattling mode and symmetry lowering resulting from the instability of the B12 molecule in LuB12 | Physical Review B | 2018 | 42 |
10 | Thermal Barrier Coatings: Current Status, Search, and Analysis | Powder Metallurgy and Metal Ceramics | 2018 | 37 |
11 | Influence of elastic strain gradient on the upper limit of flexocoupling strength, spatially modulated phases, and soft phonon dispersion in ferroics | Physical Review B | 2016 | 36 |
12 | Synthesis, Structural, Thermal, and Electronic Properties of Palmierite-Related Double Molybdate α-Cs2Pb(MoO4)2 | Inorganic Chemistry | 2017 | 33 |
13 | Electrode Materials for Composite and Multilayer Electrospark-Deposited Coatings from Ni–Cr and WC–Co Alloys and Metals | Powder Metallurgy and Metal Ceramics | 2017 | 32 |
14 | Radial thermal expansion of pure and Xe-saturated bundles of single-walled carbon nanotubes at low temperatures | Low Temperature Physics | 2009 | 31 |
15 | Electronic structure of β-RbNd(MoO4)2 by XPS and XES | Journal of Physics and Chemistry of Solids | 2015 | 31 |
16 | The lower symmetry electron-density distribution and the charge transport anisotropy in cubic dodecaboride LuB12 | Journal of Physics Condensed Matter | 2018 | 31 |
17 | New method for synthesis of fullerenes and fullerene hydrides from benzene | Russian Journal of Applied Chemistry | 2012 | 30 |
18 | The Al–Cr–Fe phase diagram. I. Phase equilibria at subsolidus temperatures over composition range 58–100 at.% Al | Powder Metallurgy and Metal Ceramics | 2011 | 27 |
19 | Quality Analysis of Aluminized Surface Layers Produced by Electrospark Deposition | Powder Metallurgy and Metal Ceramics | 2018 | 27 |
20 | Observation of dynamic charge stripes in Tm0.19Yb0.81B12 at the metal–insulator transition | Journal of Physics Condensed Matter | 2019 | 27 |
21 | Modern methods for hydrothermal synthesis of ZrO2-based nanocrystalline powders | Powder Metallurgy and Metal Ceramics | 2009 | 26 |
22 | Production technology, structure and properties of Cu–W layered composite condensed materials for electrical contacts | International Journal of Refractory Metals and Hard Materials | 2011 | 26 |
23 | Effect of the Structure of TiB2–(Fe–Mo) Plasma Coatings on Mechanical and Tribotechnical Properties | Powder Metallurgy and Metal Ceramics | 2017 | 24 |
24 | Construction of stess-strain curves for brittle materials by indentation in a wide temperature range | Science of Sintering | 2007 | 24 |
25 | High-temperature and electrochemical oxidation of transition metal silicides | Powder Metallurgy and Metal Ceramics | 2009 | 23 |
26 | Structure, Phase Composition, and Wear Mechanisms of Plasma-Sprayed NiCrSiB–20 wt.% TiB2 Coating | Powder Metallurgy and Metal Ceramics | 2015 | 23 |
27 | Synthesis and growth mechanism of zinc oxide nanostructures in arc discharge | Technical Physics Letters | 2007 | 22 |
28 | Mechanical properties of HfB2.7 nanocrystalline thin films | Journal of Superhard Materials | 2011 | 22 |
29 | Microstructure and mechanical properties of hard Ti–Si–C–N films deposited by dc magnetron sputtering of multicomponent Ti/C/Si target | Surface and Coatings Technology | 2011 | 22 |
30 | High-temperature (to 1600°C) oxidation of ZrB2–MoSi2 ceramics in air | Powder Metallurgy and Metal Ceramics | 2012 | 22 |
31 | Pressure sintering kinetics of tungsten and titanium carbides | International Journal of Refractory Metals and Hard Materials | 2013 | 22 |
32 | Features of Physical and Chemical Adsorption During Interaction of Polycrystalline and Nanocrystalline Materials with Gases | Powder Metallurgy and Metal Ceramics | 2018 | 22 |
33 | Hall and transverse even effects in the vicinity of a quantum critical point in Tm1 − x Yb x B12 | Journal of Experimental and Theoretical Physics | 2012 | 21 |
34 | Fluid synthesis and structure of a new boron nitride polymorph—hyperdiamond fulborenite B12N12 (E phase) | Physics of the Solid State | 2007 | 20 |
35 | Direct nitridation synthesis and characterization of Si3N4 nanofibers | Research on Chemical Intermediates | 2015 | 20 |
36 | Superhard Vacuum Coatings Based on High-Entropy Alloys | Powder Metallurgy and Metal Ceramics | 2016 | 20 |
37 | Effect of Electron Density on Phase Composition of High-Entropy Equiatomic Alloys | Powder Metallurgy and Metal Ceramics | 2016 | 20 |
38 | Crystal structure, electric field gradient, and electronic charge densities in ReB2: A single crystal x-ray, B11 nuclear magnetic resonance, and first-principles study | Journal of Applied Physics | 2009 | 19 |
39 | Instrumented indentation for determining the structural state of materials | Powder Metallurgy and Metal Ceramics | 2010 | 19 |
40 | Structure and Mechanical Properties of High-Entropy AlCuNiFeTi and AlCuNiFeCr Alloys Produced by Mechanical Activation Followed by Pressure Sintering | Powder Metallurgy and Metal Ceramics | 2016 | 19 |
41 | Polymer Materials Reinforced with Silicon Nitride Particles for 3D Printing | Powder Metallurgy and Metal Ceramics | 2021 | 19 |
42 | New products of a new method for pyrolysis of pyridine | Russian Journal of Applied Chemistry | 2013 | 18 |
43 | New low-temperature method for joint synthesis of C60 fullerene and new carbon molecules in the form of C3-C15 and quasi-fullerenes C48, C42, C40 | Russian Journal of Applied Chemistry | 2013 | 18 |
44 | Influence of silver content on rifampicin adsorptivity for magnetite/Ag/rifampicin nanoparticles | Nanotechnology | 2017 | 18 |
45 | The Gd2Zr2O7-Based Materials for Thermal Barrier Coatings | Powder Metallurgy and Metal Ceramics | 2018 | 18 |
46 | Sizing and finishing agents for basalt and glass fibers | Theoretical Foundations of Chemical Engineering | 2009 | 17 |
47 | Dispersion and Carburization of Titanium Powders by Electric Discharge | Powder Metallurgy and Metal Ceramics | 2013 | 17 |
48 | Effect of deformation processing on the properties of Cu–50% Cr composite | Powder Metallurgy and Metal Ceramics | 2009 | 16 |
49 | Strain hardening of a powder body in pressing | Powder Metallurgy and Metal Ceramics | 2009 | 16 |
50 | The Effect of Charge Component Composition on the Structure and Properties of Titanium Matrix Sintered Composites with High-Modulus Compounds | Powder Metallurgy and Metal Ceramics | 2017 | 16 |